Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2008, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 26 Jun 2008 14:01:29 -0700
Reply-To:     Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Subject:      Re: Syncro bad handling problem
Comments: To: Jake de Villiers <crescentbeachguitar@GMAIL.COM>
In-Reply-To:  <71d9cdf90806261313s2f8a889t48d1da2eeffb3745@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

you're joking right ? you put the front of the van ( on the two front tires ) on a scale, take that reading, then do the same for the rear, and compare the readings. anything drastically different, like a 60 % rear, 40 front ratio, would be cause for real concern regarding cornering stability or even straight line tracking. - which I suggested when the orginal post first came out.

as for weighing what each wheel has on it, as is done for race cars - that is really useful in getting handling right ......... but , you need a way to change the load on each corner of the car to take advantage of doing this - usually each coil spring has an adjsutable spring plate so you can fine tune things. That's not been done yet on a sycro that i've heard of.

if you've ever had a car that oversteers turning one way, and understeers turnign the oppistie directioin, that's really fun. scott turbovans

Jake de Villiers wrote: > Weigh the front, weigh the back, add. > > On Thu, Jun 26, 2008 at 10:39 AM, Bill Kasper <dragonlist@ubs.ucsc.edu> > wrote: > > >> tom, hey. a question. how do you weigh the front and rear ends? >> put the front wheels on, then the rears, then all four? >> >> what does that tell you? >> (other than that i am really slow today, and can't see the benefit of >> doing what you're saying...:). >> >> best, >> bill >> felton, ca >> >> >> On Jun 26, 2008, at 10:21 AM, Tom Forhan wrote: >> >> I'd certainly go weight it, front and rear ends, just out of >> >>> curiousity. Quarries, moving companies, garbage transfer stations, >>> its pretty easy to find a nearby truck scale. >>> >>> > > > -- > Jake > 1984 Vanagon GL > 1986 Westy Weekender "Dixie" > Crescent Beach, BC > www.crescentbeachguitar.com > http://subyjake.googlepages.com/mydixiedarlin%27 > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.