You're correct in assuming that the rubber hose temp would be something less than the temp of the coolant flowing through it. The directions on my gun said that the surface that you aim it at has a certain return reflectivity based on smooth/ rough, dull/shiny, black/ silver, etc. that will cause a certain amount of reading error. I just figure that I'm not looking for absolute accuracy, just comparative readings. I was able to find a poorly-running cylinder using this comparative concept. When I fixed the problem, the engine ran smoother, and the different temps evened out accordingly. I was very impressed and consider this IR gun a valuable tool in my arsenal. Mike B. >Although these readings are to the extreme ends of the scale, I have often wondered how accurate the readings are in automotive usage. If you aim the beam at a radiator hose, I'm sure it's giving you an accurate reading on the rubber hose temp. but wouldn't the coolant inside the hose be even hotter(at operating temperature anyway)? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.