Just completed changing out the exhaust system (all pipes, converter, muffler and o2 sensor) on my 84 camper and i found an "extra" wire hanging. I do not think i disconnected this wire but not sure and i can not seem to find where it might go. The wire is a green with black stripe but someone has extended it with about two feet of red. This is in the same bundle with the wires to the sensors in the coolant tank. I tested this green/black and it is an ignition switched 12 v. This camper is new to me and i am finding my way through it. any ideas where this could go to? I do have the Bently manual but could not seem to find it in there. Thanks, Darrel |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.