Hey volks, Can anyone refer to me to an owner site or provide input on the process of installing a Dom into a Vanagon. I'm interested in the following: Time/tools/inspections required/advised Best location (I'm thinking directly aft of the Driver) If anyone has installed an enclosed access panel on the exterior which houses the utility connections and/or provides access for PM An improved design for the air inlet/outlet If anyone knows the thickness of the stock LP tank's cylinder wall compared to those 17# tanks or smaller sold at hardware stores. If anyone has shortend the inlet tube and/or lengthened the exhaust tube from the Dom to effect a superior 'flue draft'. Amicalement! -- Neil2 '82 Diesel Westy (Duckie) Nunquam Pendite Divendium |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.