Date:         Wed, 2 Jul 2008 16:48:04 -0700
Reply-To:     Jeffrey Vickers <jeff@VICKERSDESIGN.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeffrey Vickers <jeff@VICKERSDESIGN.COM>
Subject:      Re: Vitrifrigo installation w/ storage
In-Reply-To:  <20080702232703.51296461C9A@izzy.vickersdesign.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes

Richard,

I don't know if you've cut your cabinets yet, but I just got an
Isotherm (very similar to the Vitrifrigo) and discovered that if I
move the drain under the sink, I can put the fridge under the sink
with about 1/8" to spare under the drawer. Not sure if a Vitrifrigo
will do the same but its worth a look. You'll free up your old fridge
space to make a huge cabinet and you won't have to fab a drawer.
Moving the drain will be a lot easier than fabricating a drawer. My
Isotherm has some metal flashing around it that I will have to cut
down about 3/8" to make it fit but that's easy as well.

Jeff / San Anselmo
On Jul 2, 2008, at 4:21 PM, Automatic digest processor wrote:

> Date:    Wed, 2 Jul 2008 16:22:49 -0600
> From:    Richard A Jones <jones@COLORADO.EDU>
> Subject: Vitrifrigo installation w/ storage
>
> I'm installing my Vitrifrigo (or "invitrio" as I
> call it....)
>
> Has anyone made any usable storage either above or
> below the fridge?  There is a couple of inches
> (vertical) that could be a drawer or something.
>
> If you have done this, I'd love to hear about it--
> and pix would be great, too.  (By p-mail)
>
> Thanks,
> Richard