Scott, I did find one locally, and as you mention they are the same for all VWs as far as I know. RE making one: turning stuff like that is something I really miss about not having access to a lathe! Jim
On Wed, Jul 9, 2008 at 1:46 AM, Scott Daniel - Turbovans < sottdaniel@turbovans.com> wrote: > find one yet ? > air-cooled 1600 might use the same part. > or you could make one. scott ----- Original Message ----- From: "Jim > Felder" <jim.felder@GMAIL.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Friday, July 04, 2008 7:22 PM > Subject: Need dowel pin for 2.1 crankcase. > > > > I need a dowel pin for the only place it is used to locate a crank bearing >> in a 2.1 engine. If you have a 2.1 or 1.9 block, you will know the one I >> mean. >> >> Anyone? >> >> Thanks, >> >> Jim >> > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.