I have Hella 550's that I wired into the bright/high beam wire right at the OE lights. I use relays so all this draw bypasses the vulnerable headlight switch. I think a better way to do this is a larger, direct wires from the battery, relayed with a separate switch on the dash. I grounded each Hella with a separate wire to the firewall/tin up front within a foot or so of the light, but then I did that with the OE headlights as well.So far so good. Bob Stevens '87 Syncro Westy _________________________________________________________________ It’s a talkathon – but it’s not just talk. http://www.imtalkathon.com/?source=EML_WLH_Talkathon_JustTalk |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.