Paul, I just R&Rd my dometic, and noticed that the piezo part's screws were loose and it had slipped back a bit -- end result was that you really had to push the button on the front panel in far to get it to spark at all. I tightened the screws and bent the metal bracket forward a tiny bit, which helped. Wondering if a loose/bent bracket could be causing a weak spark for you? do you get a strong spark if you push the sparker button directly instead of using the front panel control? On Jul 14, 2008, at 7:53 AM, Paul Connelly wrote: > Now wait a minute... > > I see Go Westy has the Piezo Electric "Switch" (push button part) - I > thought that the part that would need replaced would be the "Igniter > wire" > that actually goes into the "combustion chamber", but thinking about > it, I > suppose that is just a wire and piece of metal to allow the charge > to create > a spark. So I am just getting a weak charge from the "switch" part - > does > that make sense? > > TIA > > Cheers, Paul. > 1986 Syncro Westy - Hummingbird > > > On Sun, Jul 13, 2008 at 6:21 PM, Kim Brennan <kimbrennan@mac.com> > wrote: > >> Last time I had to get one I found out that you can't get it from >> "normal" >> Dometic suppliers. On the other paw it can be had from our >> traditional >> vendors. I think I got it from GoWesty. >> >> Sent from my iPhone >> >> >> On Jul 13, 2008, at 6:56 PM, Paul Connelly <vanagonhummingbird@GMAIL.COM >> > >> wrote: >> >> Hi All, >>> >>> I'm sure this has been done before somewhere sometime, but I >>> couldn't find >>> it in the archives. The old dometic has been getting more finicky >>> to light >>> lately on propane, so stripped it out today and did a clean up/ >>> out, and I >>> am >>> getting a really weak spark from the piezo electric for the pilot >>> light. >>> It >>> has to be only a mm or so from the gas feed and even then the >>> first spark >>> has a little meat to it after that its weak or nothing at all. >>> >>> Question is - is that a "standard part" that I get get somewhere, >>> or is it >>> dometic specific, and anyone know of a supplier??? >>> >>> TIA >>> >>> Cheers, Paul. >>> 1986 Syncro Westy - Hummingbird >>> >> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.