Right. Had planned to either just cover the lower junction box with a plate or do something else with it, like add an additional double power receptacle. At this point I'll probably live with the stump of the button, since the circuit breaker still works, or replace the breaker with the GoWesty circuit breaker just to make it nice. Unless my hardware store guy comes up with some other interesting solution. In any case, I'll let you know. Thanks everyone, for all the help and suggestions! Thomas
On Jul 14, 2008, at 4:44 PM, Todd Last wrote: > I had previously added a GFCI outlet to my Westy with the circuit > breaker. I may be wrong, but I thought when I looked at the breaker > it seemed to be a pretty standard part that you could get at a > better hardware or electronics store. If you remove the breaker, > then you have a hole to deal with.. Although it might be cool to > have a breaker and a small 120V voltage gauge in the lower panel. > > regards, > Todd > '88 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.