The spring-loaded nut that threads on the shaft inside the base has come loose. I have had to replace this nut before, but this is on a different van and I am having no luck. Besides having to work inside the small opening of the base, and trying to thread it back on against the spring, there are the 5 or 6 small wires coming through the middle. I am having no luck. I have searched the archives and only find msgs about not tightening it too much, nothing about getting it back on. Any suggestions, please? Jerry |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.