Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2008, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 21 Jul 2008 07:32:38 -0700
Reply-To:     Dave Mari <vw4x41987@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dave Mari <vw4x41987@YAHOO.COM>
Subject:      87 Westy Sliding Door Adjustment
Comments: To: The Westy man <zolo@foxinternet.net>
In-Reply-To:  <FAC854CA8E20475CA800E6A40164491F@ZoltanPC>
Content-Type: text/plain; charset=us-ascii

The problem is only with the top bearing at the end of the track as you are closing the door it has to turn into the van this is were its dropping down out of the top of the track. If I losen the two screws attaching the track arm assy onto the sliding door it works fine. The track it self is in good shape and there all all new bearing in place.

Dave

--- On Mon, 7/21/08, The Westy man <zolo@foxinternet.net> wrote:

> From: The Westy man <zolo@foxinternet.net> > Subject: Re: 87 Westy Sliding Door Adjustment > To: "Dave Mari" <vw4x41987@YAHOO.COM>, vanagon@GERRY.VANAGON.COM > Date: Monday, July 21, 2008, 10:18 AM > Dave, > Even though you explain it, I still don't understand it > well. It sounds > like the assembly on the running track gets disconnected > from the track. > There must be something broken there, I guess. Maybe you > would need to get > a whole unit that fits on the track and replace it. I > don't remember any > adjustment with that, unless the lock's bolts can be > moved a little, I > think. > I know, the front can be adjusted. > Zoltan > > ----- Original Message ----- > From: "Dave Mari" <vw4x41987@YAHOO.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Monday, July 21, 2008 6:04 AM > Subject: 87 Westy Sliding Door Adjustment > > > > Hi all, > > > > > > I looking for some tricks/info on adjusting my 87 > Westy Sliding door, as > > the TOP bearing on the rear swing out track is droping > out the track at > > the very end right before the door if is fully closed > and the bearing > > turns left into the van. > > > > > > > > TIA, > > Dave > > 87 Syncro Westy ZETEC! > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG. > > Version: 7.5.524 / Virus Database: 270.5.0/1555 - > Release Date: 7/16/2008 > > 6:43 AM > > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.