Date:         Mon, 21 Jul 2008 08:27:29 -0700
Reply-To:     neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil N <musomuso@GMAIL.COM>
Subject:      Re: electrical question - ignition switch
Comments: To: Florian Speier <groups.florian@gmail.com>
In-Reply-To:  <dad0e8a40807210733r1735c7c4ya3d531b691319e19@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

AFAIK, you can swap out the lock for another one.

There is a "short cut" in the archives about ignition switch
replacement. Easier/faster than Bentley procedure. It may help with
lock replacement.

Cheers,

Neil.

On Mon, Jul 21, 2008 at 7:33 AM, Florian Speier
<groups.florian@gmail.com> wrote:
> ok, seems like nobody knows. Some more testing revealed that this is not
> standard behavior, but a bad ignition switch. the power on that cable now
> comes on when i move the key around a little in the ign on position.
> well I am glad the switch is messing with that cable, and not any of the
> ones that are important to run the engine.
> now, next question, can i transfer the lock from a spare ignition switch
> into this one?
>
> thanks
> florian
>
> On Fri, Jul 18, 2008 at 4:47 PM, Florian Speier <groups.florian@gmail.com>
> wrote:
>
>> Hi all,
>>
>> on an 1987 u.s. spec westy, is the grey black .5mm cable, coming out of the
>> ignition switch, supposed to become powered upon the insertion of the key
>> and depowered when the key is turned on? i am talking about the cable on
>> track 11, bentley 97.104.
>> I have, until know, used power from there to power my aux gauges, but now
>> they only come on with the key in and ign off. no idea what changed though.
>>
>> thanks
>> florian
>>
>



--
Neil Nicholson '81 JettaWesty "Jaco
http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
http://web.mac.com/tubaneil
http://tubaneil.googlepages.com/