another affective way is to undo the big nut and take off the drum and flange together..... then a simple hammer whack or two will knock the flange out of the drum. heat is good too of course.
----- Original Message ----- From: "Walt Spak" <b20swalt@CITY-NET.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, July 23, 2008 6:56 PM Subject: Re: Rear Brake Drum Removal Suggestions?
> The key is to heat it, as Craig said, according to Ken's instructions, > around the center of the drum where it contacts the hub. Then hit it > with a heavy hammer and sizable drift in between the studs. That will > knock it loose with our distorting or warping the drum. > > I always loosen the drums before I take the bus in for inspection, > because my inspection mechanic did warp a drum once. > > Walt |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.