Date: Sat, 26 Jul 2008 13:58:46 -0700
Reply-To: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject: Re: WANTED: Pictures of Syncro engine compartment
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
re "I can not figure
out where these harnessess mate with the vehicle main harness. '
Do you have a wiring diagram for the ECU ?
off the top of my head I think the ECU only interfaces with the van for :
Batt power
Ign on power
start signal
( grounds of course )
that would be it, rigth ?
and I can well imagine they have a stand alone Oxygen sensor system, i.e.
not integrated like we're used to.
single wire or 3 wire 02 ?
----- Original Message -----
From: "Chris S" <szpejankowski@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Saturday, July 26, 2008 12:50 PM
Subject: Re: WANTED: Pictures of Syncro engine compartment
> DJ-code is a European WBX with 112 hp and a DIGIJET ECU. The engine code
> is
> at the base of the oil breather tower:
>
> http://i16.photobucket.com/albums/b7/misterpolak/WBX_transplant/WBXDJenginenumber.jpg
>
> The myth is that no DJ-code engines came with a Catalytic converter or O2,
> which is not true for all of them. The DJ wiring harness is in two
> pieces,
> one main ECU and a secondary ECU which controlls O2, and other functions.
> They both sit behind the left taillight like a 1.9L ECU. I can not figure
> out where these harnessess mate with the vehicle main harness. I also
> don't
> know how this is related to the MV Digifant harness. It's pretty obvious
> in
> my '84 as the interface is a large box on the "firewall". Any pictures of
> the left side of the engine compartment would help.
>
> Chris.
>
> On Sat, Jul 26, 2008 at 2:20 PM, Paul Connelly
> <vanagonhummingbird@gmail.com
>> wrote:
>
>> Hey Chris,
>>
>> Happy to take any pictures that you would like, but how do I know if its
>> MV
>> or DJ?
>>
>> Cheers, Paul.
>> 1986 Syncro Westy - Hummingbird
>>
>>
>> On Sat, Jul 26, 2008 at 8:43 AM, Chris S <szpejankowski@gmail.com> wrote:
>>
>>> I'm the process of installing a DJ-code WBX from a euro-Syncro into my
>>> '84
>>> Westy.
>>>
>>> If you have pics of a Syncro engine compartment, MV of DJ engine, could
>>> you
>>> email them to me? I'm trying to nail some details of the harness
>>> layout,
>>> etc.
>>>
>>> DJ-code engine compartment pics will be especially helpful.
>>>
>>> Thanks a billion!
>>>
>>> Chris S.
>>>
>>
>>
|