are the nuts inside the case 19 mm wrench size like the outside ones ? I just looked into a 1.9 block if have with the pistons and barrles off....... and the inside nuts like like 17 mm wrench size..... and they look like nuts with a 'shoulder/washer' built onto the nut, or nuts with washers. scott ----- Original Message ----- From: "Jim Felder" <jim.felder@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Friday, July 25, 2008 8:46 AM Subject: Waterboxer assembly detail sought
> Question: on the waterboxer block case there are 10mm studs external to > and > internal to the water jacket casting. These are the studs that clamp the > main bearing journals. Are there supposed to be washers under the long > nuts > that are inside the water jacket, like there are on the ones outside the > water jacket? > Bentley doesn't show any, but as I've discovered lately, that's no proof. > > Jim |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.