|
Begin forwarded message: > From: Thomas Jefferson Kitts <thomas@THOMASKITTS.COM> > Date: July 26, 2008 12:50:43 PM PDT > To: <vw.doka@gmail.com> > Subject: Re: Ongoing saga: Dometic and Multimeter . . . > > > On Jul 26, 2008, at 12:23 PM, Jeff @ Autostadt West wrote: > >> Uh... have you tested the heating element? Common failure point. >> >> Cheers, >> >> Jeff > > Right on! Just pulled the 120v heater rod from the sleeve and made a > direct circuit to it and the black wire. > > Multimeter reading: 0.1-0.2 > > So I assume you are right. The heating rod (element) is shot. Took > me a while to figure it out but then I am new to this. > > Anyone make these things new, and if so, where can I get one? > > I'll check the usual GoWesty and BusDepot guys. > > TIA, > > Thomas > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.