Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (July 2008, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 25 Jul 2008 22:24:11 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: Waterboxer assembly detail sought
Comments: To: Jim Felder <jim.felder@GMAIL.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

are the nuts inside the case 19 mm wrench size like the outside ones ? I just looked into a 1.9 block if have with the pistons and barrles off....... and the inside nuts like like 17 mm wrench size..... and they look like nuts with a 'shoulder/washer' built onto the nut, or nuts with washers. scott ----- Original Message ----- From: "Jim Felder" <jim.felder@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Friday, July 25, 2008 8:46 AM Subject: Waterboxer assembly detail sought

> Question: on the waterboxer block case there are 10mm studs external to > and > internal to the water jacket casting. These are the studs that clamp the > main bearing journals. Are there supposed to be washers under the long > nuts > that are inside the water jacket, like there are on the ones outside the > water jacket? > Bentley doesn't show any, but as I've discovered lately, that's no proof. > > Jim


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.