Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2008, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 23 Jul 2008 14:28:52 -0700
Reply-To:     Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Subject:      Re: Whats it called??
Comments: To: Mike <mbucchino@charter.net>
In-Reply-To:  <029201c8ecfe$fd07e320$0c00a8c0@mike2d93581d7f>
Content-Type: text/plain; charset=ISO-8859-1

I'm using 5/8" heater hose too - its perfect for the job. Been in my '84 for 8 - 10 years now.

On Wed, Jul 23, 2008 at 1:02 PM, Mike <mbucchino@charter.net> wrote:

> I reinforced the interior of the breather hose on my 2.1 with a spiral of > .041" safety wire to prevent collapse under vacuum. Works great! > > Mike B. > > ----- Original Message ----- > From: "Evan Mac Donald" <vanagon_dad@SBCGLOBAL.NET> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Wednesday, July 23, 2008 12:38 PM > Subject: Re: Whats it called?? > > > Yup. 5/8" heater hose. Stiff enough walls that it won't collapse under >> vaccuum, and it is proof against hot oil and other type hydrocarbon vapors >> it will come in caontact with. I even went so far, on my 1.9 (which is >> slightly different), to replace most of the hose with a piece of steel >> tube, and only used the rubber hose on the ends, at the breather tower, >> and the intake manifold adapter. Has done well over the past 5 years of >> daily driving... >> >> "by way of David Beierl <dbeierl@attglobal.net>" >> <Ccsvanagon@WMCONNECT.COM> wrote: In a message dated 7/22/2008 11:02:28 >> PM Central Daylight Time, >> dbeierl@attglobal.net writes: >> >> >> Crankcase ventilation (black tower rising from engine, fattish black >>> hose going forward, may have a small heater inserted in the hose)? >>> >> >> >> That's it. I want to put a new hose on it. Right now I am using a >> piece of red heater hose. >> >> By the way, I forgot to mention this is an '87 Wolfburg edition Van. >> >> Any one know the part number for the hose? >> >> Thanx, >> >> Chris >> >> Snyder >> >

-- Jake 1984 Vanagon GL 1986 Westy Weekender "Dixie" Crescent Beach, BC www.crescentbeachguitar.com http://subyjake.googlepages.com/mydixiedarlin%27


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.