Get a 14mm stud kit for the front hubs, then you can use factory (ball seat) lugnuts or conical seat lufnuts (available at any FLAPS). Make sure you keep a set of ball seat lugnuts for your spare. www.prestigewheel.com will have the correct lug bolts and the stud kits. Good luck, > Has anyone ever found a really correct longer from mounting bolt ? > 14 mm thread, > same length at the stock alloy wheel front mounting bolt - but those are > cone face and Ball Face where it contacts the wheel is what's normally > needed. > and.........19 mm ( 3/4 inch ) hex lug wrench size. > > havn't ever quite found that combination. Close, but not exactly. > Thnx.,
TJ Hannink Goldibox - 1987 Vanagon Camper, Wolfsburg Edition 1981 Bluebird Wanderlodge, FC-33SB Des Allemands, Louisiana http://groups.yahoo.com/group/wolfsburg_campers http://groups.yahoo.com/group/FC_wanderlodge |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.