This is from that Pampers-wearin' 85 Westy again. Good news: I seem to have fixed the annoying drip of ATF from the tranny by adding some thickener to the fluid. Bad news: The power steering lines are still leaking like a sieve, regardless of the viscosity of the fluid. I'm thinking I'll have to try Ken's replacement hydraulic lines for the rusty metal ones. Worse news: The oil leak at the valve head still leaks after replacing the gaskets, at least on the driver's side. I did notice a small hole rusted through the valve head right at the gasket, so that may be the culprit, but that ain't all. Turns out that the leaking fluid is a mixture of oil and coolant. So am I looking at a cylinder head job here, or hopefully just some seals? I don't know what other criteria I should be checking to see if the heads themselves are bad. All guidance is gratefully appreciated. Cecil '85 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.