Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2008, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 3 Aug 2008 22:40:37 -0400
Reply-To:     craig cowan <phishman068@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         craig cowan <phishman068@GMAIL.COM>
Subject:      From rags to westy in a week.
Content-Type: text/plain; charset=ISO-8859-1

Well the weekend has passed, and boy do i have alot to show for it! I started out friday night with a 1980 westy in deplorable shape, and a 1985 vanagon with a full interior, and after only 26 hours of work (14 hours saturday, only 12 today), i have a fully gutted westy, with the entire interior in my garage and most of it cleaned up, a fully gutted '85GL, all the curtains and curatin hardware has been transfered to the '85, the rear cabinet has been cut down 3 inches and installed (It worked out great!), The propane tank and all the westy accessories are off and ready to go, i've removed the westy floor, and the vanagon floor is recieving some holes. I borrowed a welder today in anticipation of cutting and welding in the seat brackets (And the one under the kitchen), have removed the rear heater core (which will have to be relocated or negated for the time being), Replaced all my rear seatbelts with the westy configuration, and cleaned up and addressed the start of some rust behind where the fridge will sit on my '85. Oh ya, i also found time to pull the engine and transmission, and they went off to a loving home. I would say a pretty fullfilling weekend as a whole. Tommorow evening i will try to get these holes cut, the floor secured, and start cutting/welding in the brackets that need to be addressed. I also plan to figure out how to mount the propane tank on the '85. I'm guessing i need to drill some holes, send some bolts through, and weld the heads inplace?

I hope to have a 'roof removal party' friday, so i need to have almost everything done by then so I can gather my friends with their favorite cutting instruments, to do some serious damage. So, who thinks a westy can be built in a week? : )

-Craig '85(Gutted)


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.