Date:         Fri, 1 Aug 2008 15:53:46 -0600
Reply-To:     Richard A Jones <jones@COLORADO.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Richard A Jones <jones@COLORADO.EDU>
Subject:      Re: Got the wrong Vitrifrigo!
Comments: To: jeff@VICKERSDESIGN.COM
In-Reply-To:  <20080801203508.1D90E81181D@lbh0.Colorado.EDU>
Content-Type: text/plain; charset=ISO-8859-1

> Since I don't plan on going back to the Dometic I am thinking that I
> can use my fridge door to make a drawer front that matches the other
> drawer. All the grey trim is there so I'd just have to cut off the top
> of the fridge door to get a piece with the two top radius corners and
> then cut the same radius for the bottom corners. Wrap the trim around
> the new cuts, make a face plate like yours and cut the hole for the
> drawer front out of the bottom of the face plate and Bob's yer Uncle.

If I were starting now, I think I'd use the Dometic frame--cut it square
to work with the Vitrifrigo as Karl's web pages show.  Then cut a
drawer face (approx 4x17)from the fridge door--layed out vertically.

Richard