Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2008, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 2 Aug 2008 18:25:41 -0700
Reply-To:     mdrillock <mdrillock@COX.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mdrillock <mdrillock@COX.NET>
Subject:      Re: Adding a westy interior to a passanger van
Comments: To: craig cowan <phishman068@GMAIL.COM>
In-Reply-To:  <d1ea9acf0808021735u5ce5c98bv2591419e9cf3ad9f@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

The closet is way too tall because you have the MUCH thicker rear roof assembly of the sliding roof (sunroof). Ordinary passenger vans don't have that problem and the closet can be used with no trimming in those. There are 2 small nubs that can be rounded off so it won't press into the headliner as much but no real trimming for height for standard passenger van use. Your sunroof situation is another matter. You have a double wall roof with a big space between for the roof to slide back into.

Leave the headliner alone!

Mark

craig cowan wrote: > So as some of you may know, i just picked up my first westy! It's a 1980, > and it's in contention for "Rustiest Vanagon" in the world, but i'm only > interested in the interior. If i can't afford a real working westy, but have > a working vanagon, it's time to make my own dreams come true. So....i have > some questions. > > I'm adding a westy interior into an '85 sunroof van that already has a > poptop, but i guess most of the following would apply to any passanger van > that you're adding an interior too. First and foremost, what to do about the > headliner? Leave it in, take it out? > Secondly, the rear cabinet will need to be trimmed in order to fit, as it's > roughly 3 inches too tall to fit in a passanger van (with a curved roof). > So, do yo guys trim off the top? If so, how does that effect the attachment > of the overhead cabinet (Which i might not be able to use as well as a > result in the curved roof, and the inability to send bolts THROUGH the > sunroof). > > Any thoughts? > > -Craig > '85GL (Half westy at this point) > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.