Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2008, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 4 Aug 2008 01:25:09 -0700
Reply-To:     Roger Whittaker <rogerwhitt1@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Roger Whittaker <rogerwhitt1@GMAIL.COM>
Subject:      brass crescent wrench society this time with the link intact :)
Comments: To: Scott Daniel - Turbovans <scottdaniel@turbovans.com>
Content-Type: text/plain; charset=ISO-8859-1

http://www.adf-safetytools.com/

On Sun, Aug 3, 2008 at 11:28 PM, Scott Daniel - Turbovans < scottdaniel@turbovans.com> wrote:

> I guess I'm lucky I didn't blow myself up all these last years.......... > swappin' out trailer type propane tanks and whatnot with an ordinary > crescent wrench. > But that's a beautiful metal. A brass crescent wrench would suure be a > nice thing. > > > Somehow I never have much fire trouble, or if there is any .........I think > I've gotten 4 car fires out within 30 seconds or even less. > I'm sure I'll think of you next time I conenct a propane tank or > whatever............or now I'll stumble across a braass crescent wrench ( > I've never seen one, not sure they even exist normally ) ..........and then > I'll have to buy it. ! ;-) > > > ----- Original Message ----- From: "Roger Whittaker" < > rogerwhitt1@GMAIL.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Sunday, August 03, 2008 10:51 PM > > Subject: Re: From rags to westy in a week. > > > dear scott >> no i do not have personal brass propane wrenches >> but if i were going to work on a tank on a vanagon >> i would go get some >> ;) >> yours >> >> On Sun, Aug 3, 2008 at 10:44 PM, Scott Daniel - Turbovans < >> scottdaniel@turbovans.com> wrote: >> >> you personally have *brass* wrenches, Roger, for working on propane ? >>> I don't know anyone who does, 'cept for places that work on propane full >>> time perhaps. >>> >>> ----- Original Message ----- From: "Roger Whittaker" < >>> rogerwhitt1@GMAIL.COM> >>> To: <vanagon@GERRY.VANAGON.COM> >>> Sent: Sunday, August 03, 2008 10:28 PM >>> Subject: Re: From rags to westy in a week. >>> >>> >>> >>> dear craig >>> >>>> i hope you are storing the propane tank outside and away from errant >>>> sparks >>>> while you work >>>> hook it together with brass wrenches ... check for leaks constantly >>>> use only new fittings and hoses >>>> be safe >>>> yours >>>> >>>> On Sun, Aug 3, 2008 at 7:40 PM, craig cowan <phishman068@gmail.com> >>>> wrote: >>>> >>>> Well the weekend has passed, and boy do i have alot to show for it! I >>>> >>>>> started out friday night with a 1980 westy in deplorable shape, and a >>>>> 1985 >>>>> vanagon with a full interior, and after only 26 hours of work (14 hours >>>>> saturday, only 12 today), i have a fully gutted westy, with the entire >>>>> interior in my garage and most of it cleaned up, a fully gutted '85GL, >>>>> all >>>>> the curtains and curatin hardware has been transfered to the '85, the >>>>> rear >>>>> cabinet has been cut down 3 inches and installed (It worked out >>>>> great!), >>>>> The >>>>> propane tank and all the westy accessories are off and ready to go, >>>>> i've >>>>> removed the westy floor, and the vanagon floor is recieving some holes. >>>>> I >>>>> borrowed a welder today in anticipation of cutting and welding in the >>>>> seat >>>>> brackets (And the one under the kitchen), have removed the rear heater >>>>> core >>>>> (which will have to be relocated or negated for the time being), >>>>> Replaced >>>>> all my rear seatbelts with the westy configuration, and cleaned up and >>>>> addressed the start of some rust behind where the fridge will sit on my >>>>> '85. >>>>> Oh ya, i also found time to pull the engine and transmission, and they >>>>> went >>>>> off to a loving home. I would say a pretty fullfilling weekend as a >>>>> whole. >>>>> Tommorow evening i will try to get these holes cut, the floor secured, >>>>> and >>>>> start cutting/welding in the brackets that need to be addressed. I also >>>>> plan >>>>> to figure out how to mount the propane tank on the '85. I'm guessing i >>>>> need >>>>> to drill some holes, send some bolts through, and weld the heads >>>>> inplace? >>>>> >>>>> I hope to have a 'roof removal party' friday, so i need to have almost >>>>> everything done by then so I can gather my friends with their favorite >>>>> cutting instruments, to do some serious damage. So, who thinks a westy >>>>> can >>>>> be built in a week? : ) >>>>> >>>>> -Craig >>>>> '85(Gutted) >>>>> >>>>> >>>>> >>>> >>>> -- >>>> roger w >>>> There are two kinds of jobs in the world: >>>> Picking up garbage and telling people things. >>>> Successful people do both, with the same good attitude. (riw) >>>> ----------------------------------------------------------- >>>> View the growing list of video work at: >>>> http://revver.com/find/video/?query=LastonLastof&search_on=owners >>>> and ... older work at >>>> http://video.google.com/videoplay?docid=-7135104650374818257 >>>> http://video.google.com/videoplay?docid=3259745150182742364 >>>> >>>> >>> >>> >> >> -- >> roger w >> There are two kinds of jobs in the world: >> Picking up garbage and telling people things. >> Successful people do both, with the same good attitude. (riw) >> ----------------------------------------------------------- >> View the growing list of video work at: >> http://revver.com/find/video/?query=LastonLastof&search_on=owners >> and ... older work at >> http://video.google.com/videoplay?docid=-7135104650374818257 >> http://video.google.com/videoplay?docid=3259745150182742364 >> > >

-- roger w There are two kinds of jobs in the world: Picking up garbage and telling people things. Successful people do both, with the same good attitude. (riw) ----------------------------------------------------------- View the growing list of video work at: http://revver.com/find/video/?query=LastonLastof&search_on=owners and ... older work at http://video.google.com/videoplay?docid=-7135104650374818257 http://video.google.com/videoplay?docid=3259745150182742364


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.