Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2008, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 4 Aug 2008 11:28:31 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: From rags to westy in a week.
Comments: To: Dennis Haynes <d23haynes57@HOTMAIL.COM>
Content-Type: text/plain; format=flowed; charset="Windows-1252";
              reply-type=response

fer sure those old fashioned drop lights with an incandescent bulb...... not used much anymore, but they are quite dangerous - whether burning yourself on it .......... and about the worst thing would be a fuel spill right onto one.

Been using the LED headlamp for years now though. it's 'the way.' scott turbovans ----- Original Message ----- From: "Dennis Haynes" <d23haynes57@HOTMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, August 04, 2008 5:46 AM Subject: Re: From rags to westy in a week.

> You definitely need to be careful that the propane is under control. As > for > the need for Brass wrenches, all approved propane fittings are brass, > copper, plated, or something to keep them from sparking. The Brass tools > only become a true necessity when working in what may be a hazardous > location and if using steel fittings. > > BTW, once a vehicle is in a garage, the lowest 18 inches is a hazardous > location. Does anyone here use XP rated drop lights and power tools? Think > of that if using one of those kerosene floor heaters for heat. > > >>From: Roger Whittaker <rogerwhitt1@GMAIL.COM> >>Reply-To: Roger Whittaker <rogerwhitt1@GMAIL.COM> >>To: vanagon@GERRY.VANAGON.COM >>Subject: Re: From rags to westy in a week. >>Date: Sun, 3 Aug 2008 22:28:35 -0700 >> >>dear craig >>i hope you are storing the propane tank outside and away from errant >>sparks >>while you work >>hook it together with brass wrenches ... check for leaks constantly >>use only new fittings and hoses >>be safe >>yours >> >>On Sun, Aug 3, 2008 at 7:40 PM, craig cowan <phishman068@gmail.com> wrote: >> >> > Well the weekend has passed, and boy do i have alot to show for it! I >> > started out friday night with a 1980 westy in deplorable shape, and a >>1985 >> > vanagon with a full interior, and after only 26 hours of work (14 hours >> > saturday, only 12 today), i have a fully gutted westy, with the entire >> > interior in my garage and most of it cleaned up, a fully gutted '85GL, >>all >> > the curtains and curatin hardware has been transfered to the '85, the >>rear >> > cabinet has been cut down 3 inches and installed (It worked out >> > great!), >> > The >> > propane tank and all the westy accessories are off and ready to go, >> > i've >> > removed the westy floor, and the vanagon floor is recieving some holes. >>I >> > borrowed a welder today in anticipation of cutting and welding in the >>seat >> > brackets (And the one under the kitchen), have removed the rear heater >>core >> > (which will have to be relocated or negated for the time being), >>Replaced >> > all my rear seatbelts with the westy configuration, and cleaned up and >> > addressed the start of some rust behind where the fridge will sit on my >> > '85. >> > Oh ya, i also found time to pull the engine and transmission, and they >>went >> > off to a loving home. I would say a pretty fullfilling weekend as a >>whole. >> > Tommorow evening i will try to get these holes cut, the floor secured, >>and >> > start cutting/welding in the brackets that need to be addressed. I also >> > plan >> > to figure out how to mount the propane tank on the '85. I'm guessing i >>need >> > to drill some holes, send some bolts through, and weld the heads >>inplace? >> > >> > I hope to have a 'roof removal party' friday, so i need to have almost >> > everything done by then so I can gather my friends with their favorite >> > cutting instruments, to do some serious damage. So, who thinks a westy >>can >> > be built in a week? : ) >> > >> > -Craig >> > '85(Gutted) >> > >> >> >> >>-- >>roger w >>There are two kinds of jobs in the world: >>Picking up garbage and telling people things. >>Successful people do both, with the same good attitude. (riw) >>----------------------------------------------------------- >>View the growing list of video work at: >>http://revver.com/find/video/?query=LastonLastof&search_on=owners >>and ... older work at >>http://video.google.com/videoplay?docid=-7135104650374818257 >>http://video.google.com/videoplay?docid=3259745150182742364


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.