Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2008, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 5 Aug 2008 22:35:10 -0230
Reply-To:     Joy Hecht <hecht.joy@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Joy Hecht <hecht.joy@GMAIL.COM>
Subject:      Re: Why plug the dash air intake screen?
Content-Type: text/plain; charset=ISO-8859-1

My A/C hasn't worked for years, but not being able to shut off the heat is a nuisance at times.

Joy

and Matilda, now back in Newfoundland perhaps for a while...

(and back on the list after a long time off)

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Chris S Sent: Tuesday, August 05, 2008 9:57 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Why plug the dash air intake screen?

RE: blocked air fresh air intake.

Once the foam seals break down inside of the air distribution box you can't

shut off the flow of air. If the Vanagon has A/C this greatly reduces its

effectiveness. The cheap fix is to seal off the outside air intake instead

of slightly longer method: http://www.knology.net/~vw/vanagon/dash/

Chris S.

2008/8/5 Oliver Mueller-Heubach <groundhogging@mac.com>

> I noticed on the Craig's '80 parts Westy that someone crammed cloth

> behind the screen inside the front grill. My own '80 Westy had,

> similarly, the screen closed off with layers of black tape. Is this

> something to do with non-functioning vents? Cold air in winter? Bees/

> Insects getting in? The cloth in the parts van intake made me wonder

> if pouring water into the vents onto this "sponge" would create a

> rudimentary swamp cooler- but mold would be insane (then again, the

> cloth was more dirty than moldy..).

>

> Also, I have one piece of card/chipboard heat-welded to the back of

> my grill- the other, which there appears to have been, is gone. I

> assume these are for directing air into the aforementioned intake.

> 1-how much more airflow is there with both boards in place, and 2-

> how have folks attached a new board when the plastic heat welds have

> broken off?

> Thanks!

> ollie

>

> Oliver Mueller-Heubach

> groundhogging@mac.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.