Date:         Wed, 6 Aug 2008 13:06:41 -0700
Reply-To:     John Goubeaux <john@UCSB.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Goubeaux <john@UCSB.EDU>
Organization: University of California Santa Barbara
Subject:      AC Evaporator access question
Content-type: text/plain; charset=ISO-8859-1; format=flowed

I need to gain access to my AC evaporator/blower assembly  in the rear
of the van (90) My AC has the center roof mounted duct that goes fwd.

So my question:  Is it necessary to remove the front console and all of
the ducting in order to lower the rear evaporator/blower assembly?
Bentley indicates so but thought I would see if this is actually the
case. Seems like a lot of work to remove the whole duct.

Anybody done this ?

-john

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.