I agree, lifting from above has too many advantages to go back to floor jacks. I built my first version to do it that way about 10 years ago and I still use it. I have 4 floor jacks and a tranny jack but for engine removal/installation the hoist method is preferred. Another thing I use is a piece of plywood about 2' x 4'. I put 2 holes near one short edge and put a rope handle into those holes. This is what I lower the engine down onto. Then I pull the wood with engine out from under the van with the rope handle. I put the engine back the same way but I use some broom stick pieces under the plywood to help roll the engine/plywood back into place. The end of the plywood with the rope should be as far from the engine as practical to help with sliding the wood. Lowering the engine onto any kind of cart requires the vehicle to be raised higher than just a piece of plywood does. My device is more like a sawhorse with room below it for a come-a-long type hoist. The added height is required for some Vanagon engines though not waterboxers. My sawhorse is made of square steel tubing.
Mark The Westy man wrote: > Amaizing how little recognition that simple device I made, to take out > and > istall the engine to make it a joy, received. And for me to read about > double jacks and all kind of obvious struggles with platforms and what > not, > is really a puzzle why most don't realized the simplicity without lifting > the car both sides. > Well, we are not all the same, I guess. I went through my struggles > myself > too. > Zoltan > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.