Locktite Black Contact Adhesive P/N30540 Directions: 1/Clean surfaces thoroughly. Use abrasives to remove any powdery mold release from new materials. 2/ Apply a thin, even film to both surfaces. Allow to dry. 3/ Apply a second thin coat of adhesive to sections of materials not over 3 feet long. 4/ Bond immediately. Avoid putting adhesive on exposed painted surfaces. (this came with my p/t seal from Go Westy) works great. bob > A couple of weeks ago there was a thread on what sticky substance NOT to use > on pop top gaskets. I don't recall seeing what the PROPER glue might be. > My Westy has glueless pop top seals and they are falling off from their own > weight after about three years. What might be a good adherative to stick it > back up? > > Thanks, > > Tom Salicos > > '87 Syncro Westy EG-33 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.