Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2008, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 16 Aug 2008 19:23:59 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: Vanagon Water Temp Gauge - Temperatures?
Comments: To: Edward Maglott <emaglott@BUNCOMBE.MAIN.NC.US>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=response

Well you could/ should get an infrared temp gun, and get the temp of the outlet main hose when it's fully up to temp, and see what is really what on your gauge that way. I think there is not a whole lot of variation from one vanagon to the next actually. I work on dozens of them, and in my perception they are pretty consistent in how the temp gauges read. I'd say roughly..........right on the red LED is 180 degrees F. 55 % gauge deflection ( a needle's width to the right of the LED ) is about 190 degrees. a fat needle's width below the LED is about 170 degrees F.

an IR temp gun ......you gotta have one. The uses are infinite. I especially like to use them to identify cylinders not firing as well as the others - just shoot the temp of each individual header pipe. One a hundred degrees cooler than the others is often a spark plug not firing correctly, or correctly all the time, etc. a million uses, one of which is using it to calibrate your temp gauge. bottom line though ......it should run right in the middle, which is usually right on the red LED. Scott www.turbovans.com

----- Original Message ----- From: "Edward Maglott" <emaglott@BUNCOMBE.MAIN.NC.US> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, August 16, 2008 5:20 PM Subject: Re: Vanagon Water Temp Gauge - Temperatures?

>I think there is variability from vehicle to vehicle. You could > probably do some measuring on you van and come up with something. > > Edward > > At 02:08 PM 8/16/2008, Richard Golen wrote: >>Years ago I owned a 1970 BMW 2002 TI (yes TI not tii) and was a >>member of BMWCCA. In their club magazine there was an article that >>listed the water temperatures at various points in the gauge - the >>center of the gauge, the small marks to either side of the center of >>the gauge. The Vanagon water temp gauge has similar marks on either >>side of the center, and got to thinking about what temperatures are >>represented by the center of the gauge as well as the little "dots" >>on either side of center. >> >>Has anyone ever determined what the coolant temperatures are at >>those points of the gauge? >> >> >>Thanks in advance >> >> >>Ric >>_________________________________________________________________ >>See what people are saying about Windows Live. Check out featured posts. >>http://www.windowslive.com/connect?ocid=TXT_TAGLM_WL_connect2_082008


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.