Why is your engine being rebuilt for second time in 200K? On most engnies head problems are more common than problems with the bottom end. In theory new heads are a good way to go. The reality is that the quality of the replacement heads present another set of concerns. If the casting is good, (no cracks, straight, tolernaces etc,), new guides, valves, proper machining and facing of seats there is no reason used heads can't go the distance. If an outside influence such as a cooling system failure occurs new heads will melt, crack, and warp, just as well as the oil ones anyway. As you are going for rebuild #2 I would be more concerned about the case, especially for the 1.9L. And yes machine can mess up these heads big time. Especially pressing in new valve guides. Dennis
>From: B Feddish <bfeddish@NETREACH.NET> >Reply-To: B Feddish <bfeddish@NETREACH.NET> >To: vanagon@GERRY.VANAGON.COM >Subject: New vs. machined heads, a spinnoff of Engine >Replacement or Gasket Fix? >Date: Fri, 22 Aug 2008 08:38:01 -0400 > >I'm going to be in the same situation as Robert this winter and I'll be >having my 1.9 rebuilt. One of the big expenses appears to be the heads. >What is the advantage of buying new heads, vs, reconditioned heads vs. >having a machine shop do them? Let's say my current engine has gone 80K >miles on it's last set of machined heads. That was fine with me as the >rebuild was dirt cheap. Am I only getting longetivity with new heads or are >they much more reliable? Can the machine shop do it "wrong"? Are >reconditioned ones a good compromise? > >Heads come up allot here and I'm trying to determine if that extra $1000 >expense is worth it if I'm fine with my next rebuilt not being able to make >it to 200K. > > > >Thanks, >Bryan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.