its been done many times before.. i have some grey or tan ones w/ floor tracks if anyones interested. easy way to make your westy into a 6 passenger. all you do is drill up thru the dummy plastic bolts that fill the seat tracks holes under your van. then you take a radial arm saw and set it to the thickness of your plywood subfloor. then cut strips wide enough for the metal seat track rails to lay into. THERE IS NO CABINET REMOVAL NECESSARY!!!! all vanagons, weather theyre passenger vans, or panelvans, or westfalias, they ALL come with the welded on nuts under the floor for mounting the middle seat tracks. the westys came with dummy plastic bolts to fill these holes. you can see them from under your van. drill up thru them and thats where your track will be.. its all about measuring.. but there is no cabinet removal necessary.. chris
************** It's only a deal if it's where you want to go. Find your travel deal here. (http://information.travel.aol.com/deals?ncid=aoltrv00050000000047) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.