I just purchased a new VW Wiper Arm for my 84 Westy, as my current one was not holding well. I had cleaned all the loose metal out of the splines on the shaft, and noticed that the matching splines in my old arm were worn. So, I ordered a new one (p/n 251 955 409), and upon looking at the new unit, I notice no splines on it.
My question is, are the splines cut into the new arm upon attaching to the shaft, or should the arm of had splines on it.
Thanks,
Jack R. 84 Westly Wolfie. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.