Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (August 2008, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Wed, 27 Aug 2008 14:19:38 -0700
Reply-To:   Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:   Re: Header bolts broken
Comments:   To: Dennis Haynes <d23haynes57@HOTMAIL.COM>
Content-Type:   text/plain; format=flowed; charset="iso-8859-1"; reply-type=original

I like that, 'the heat wrench.'

ok, ok, I'll try stainless studs with nuts someday......... or, if you are SURE stainless bolts come right out of the heads years later..............I'll give that a try sometime. Scott ----- Original Message ----- From: "Dennis Haynes" <d23haynes57@HOTMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, August 27, 2008 9:12 AM Subject: Re: Header bolts broken

>I have been there done that with stainless bolts I have installed. Not > seized into the head but rusted to the exhaust pipe. I do like studs and > nuts. 2 chances to get it a part and the nuts always respond quickly to > the heat wrench. > > Dennis > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Frank Condelli > Sent: Wednesday, August 27, 2008 5:48 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Header bolts broken > > In a message dated 26/08/2008 7:37:24 P.M. Central Standard Time, > LISTSERV@GERRY.VANAGON.COM writes: > > Scott, sure have to disagree with ya on this one ! I have been > using stainless steel bolts and nuts on all the exhaust system > connections for > over 10 years now and the only problem I've ever seen is the bolts > sometimes > gall to the nuts. Never seen any problem with the bolts in the heads, > into > aluminium or stainless Helicoils that I or someone else has put in there. > Just > my personal experience ! > > > >>>>>>>I would sure NOT recommend stainless bolts screwed into the head. > stainless is not 'perfect magic metal' ............it corrodes ( just > more > slowly ) and breaks too, and if you ever had to try to drill out a broken > off stainless bolt, you would really be cursing whoever put them in > there. > Not fun to drill at all.<<<<<<<< > > > > > > Cheers, > > Frank Condelli > Almonte, Ontario, Canada > '87 Westy & Lionel Trains (_Collection for sale_ > (http://members.aol.com/Fkc43/trainsal.htm) ) > _Frank Condelli & Associates_ > (http://members.aol.com/Fkc43/busindex.html) > - Vanagon/Vanagon Westfalia Service in the Ottawa Valley > _Vanagon Stainless Steel Exhaust Systems_ > (http://members.aol.com/Fkc43/exhaust.htm) > _BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm) a VW Camper > camping event, Almonte, ON, June 12 ~ 15, 2008


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.