I didn't pull the dash. I was able to reach down after removing the instrument cluster and get the offending stud out and put in the new part. I don't remember the details, I just remember that I wouldn't care to do it again. Jim
On Wed, Aug 27, 2008 at 7:46 PM, <Dvdclarksn@aol.com> wrote: > BTDT too on the front and had to go to the stealership to have the linkage > replaced which meant removing the dash (cost me more than $550.00-too scared > to attempt this on my own at the time). Does anyone on the list have a > source for replacing the spring on the rear wiper? Mine needs a bit of paint > and I would like to replace the spring in the arm so the blade will actually > touch the glass. Thanks all. > > David Clarkson > 90 Westy (254k with many tired springs throughout) > > > ________________________________ > It's only a deal if it's where you want to go. Find your travel deal here. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.