Date:         Tue, 26 Aug 2008 14:54:41 +0000
Reply-To:     kayakjr@COMCAST.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Reynolds <kayakjr@COMCAST.NET>
Subject:      Coolant level sensor - repeat breakage

I had a coolant level sensor develop a split late last year, I replaced it and now with less than 1,000 miles since that time, the new sensor has split as well.  I was careful tightening it.

Could there be some reason, like too much pressure in the system that could create this problem?

This is an 86,  2.1 Vanagon

John Reynolds
LiMBO

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.