VANAGON archives -- August 2008, week 4 (#165)

Date:         Sun, 24 Aug 2008 07:25:55 -0400
Reply-To:     Roger VanTill <motelvw@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Roger VanTill <motelvw@GMAIL.COM>
Subject:      Re: Engine Temp Gauge has stopped working,
              what do I do to fix this?
In-Reply-To:  <24B4B571-B5D9-4121-BC3A-E9A6748A293A@mac.com>
Content-Type: text/plain; charset=ISO-8859-1

Got the same problem after replacing the thermostat housing. Is there
a way to test the sensor? Wiring?

On 8/24/08, Robert Stewart <robertmstewart@mac.com> wrote:
> My Automatic 88 Engine Temp Gauge has stopped working, what do I do to
>  fix this?
>
>  Note the blue and black sensors on the thermostat housing were
>  replaced months ago but for some reason the black sensor does not seem
>  to be doing it's job.
>
>  What could be the fix?
>
>  It worked once in the last month after I pressed the sensor in.
>
>  Bad wire?
>
>  Gauge damaged?
>
>  Thoughts?
>
>  Robert
>  NY
>


--
Roger
'89 Westy "The Moose Lounge"
'86 GL "Sugaree"
'90 Audi 90

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.