At 07:15 PM 9/4/2008, Joy Hecht wrote... >Does anyone have suggestions for how to do this? Ideally I'd like to >put in >a metal plug the dimensions of the hole (5/16") and the depth of the >fiberglass. But I'm guessing a fiberglass plug, or one of some other >material, might be more realistic. I would use JB Weld. Some tape on one side, fill the hole from the other side, let it set, then sand both sides smooth. JB Weld will flow when freshly mixed, so you might want to mix it, then let it sit until it gets a little stiff. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.