Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2008, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 4 Sep 2008 22:18:12 -0400
Reply-To:     Kim Brennan <kimbrennan@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kim Brennan <kimbrennan@MAC.COM>
Subject:      Re: fiberglass repair on poptop
In-Reply-To:  <71d9cdf90809041845s73268045w30ab46781ece6ebc@mail.gmail.com>
Content-type: text/plain; charset=US-ASCII; format=flowed; delsp=yes

Geeze folk, why not repair it right. Get a fiberglass repair kit, and resin. Shouldn't be all that difficult.

On Sep 4, 2008, at 9:45 PM, Jake de Villiers wrote:

> You could just fill the hole with white polyurethane caulk or use > the caulk > to glue a white acrylic circle over the hole. The stuff sticks like > crazy > and lasts forever. It should be available at the local hardware. :-) > > On Thu, Sep 4, 2008 at 4:15 PM, Joy Hecht <hecht.joy@gmail.com> wrote: > >> Hi folks, >> >> I've got a hole in my poptop that I'm looking for a way to plug. I >> ordered >> one of the poptop strut kits, followed the instructions, and it >> turned out >> the struts that came with it were shorter than the dimensions given >> for the >> holes to attach them. I attached the first strut andchecked that >> all was >> well before drilling the second hole, and found the problem. >> >> The hole should center at a spot 5/16 of an inch away from the >> existing >> hole. I've emailed the person who assembles the kits and asked him >> to send >> me struts long enough to match his instructions, but if I can patch >> the >> hole >> and drill a new one, that might be better. And probably quicker. >> >> The kit includes large fender washers that go on both sides of the >> hole in >> the poptop, and they would cover the patched hole as well providing >> some >> support. >> >> Does anyone have suggestions for how to do this? Ideally I'd like >> to put >> in >> a metal plug the dimensions of the hole (5/16") and the depth of the >> fiberglass. But I'm guessing a fiberglass plug, or one of some other >> material, might be more realistic. >> >> Suggestions? >> >> And if you're thinking of buying one of those kits, pmail me and I'll >> explain more precisely what is wrong with the instructions so you >> don't do >> the same thing. >> >> >> >> >> Joy >> > > > > -- > Jake > 1984 Vanagon GL > 1986 Westy Weekender "Dixie" > Crescent Beach, BC > www.crescentbeachguitar.com > http://subyjake.googlepages.com/mydixiedarlin%27


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.