I just got back from walmart parking lot (oh, joy) where I took the loaner coil my local shop let me use for troubleshooting. Before I removed the suspect coil, I turned on the key and stuck a test light on the positive coil terminal connector to make sure it was getting power from the ignition switch. It wasn't the switch. So, I swapped out the coil (checking connections) and it wasn't the coil. So, I guess all that's left is the hall effect sensor. I removed the distributor and will take it down to have the sensor tested tomorrow morning. If it is the sensor, anybody have a used one or a used distributor? I just check around and they seem mighty expensive. Jim |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.