Sorry, It is a 1985 westy with power steering. ----- Original Message ----- From: "Evan Mac Donald" <vanagon_dad@SBCGLOBAL.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, September 13, 2008 8:57 PM Subject: Re: Front spindle possibly needed
There are several differences we need to know before anyone can say if the parts are available - mostly the year, but also manual or power steering. If you have power steering, but put in a spindle from a non-PS Vanagon, The geometry will not be correct. The tie-rod attach ppoints are different distances from the vertical rotation centerline.
--- On Sat, 9/13/08, Cullen Stewart <cullberly@VERMONTEL.NET> wrote: From: Cullen Stewart <cullberly@VERMONTEL.NET> Subject: Front spindle possibly needed To: vanagon@GERRY.VANAGON.COM Date: Saturday, September 13, 2008, 11:01 PM I recently had bearing failure on the drivers side front spindle. The outer bearing is crispy and dry. The inner bearing is fine. I assume it had grease seeping out of the speedometer cable hole and it just ran dry over time. The passengers side looks clean and fully greased. The problem is that the bearing race seems to have welded itself onto the spindle. Upon removal it left slag on the spindle that does not want to come off. Also, the threads on the spindle look a little abused. Does anyone have a new spindle that I can purchase near central Vermont? Also, what is the size die I need to chase the threads on the spindle? Thanks |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.