"Scott Daniel - Turbovans" <scottdaniel@TURBOVANS.COM> said: > the contact at that sensor too............I have messed with 1.9 waterboxer > engines for a long time, only to eventually find the problem was poor or > intermittent contact there, although it's a much better connector on the 2.1. > and you're sure it was the ECU temps sensor you played with, and not the > gauge temp sender ? I recall reading, somewhere, that VW used a contact enhancer called Stabilant at the factory. Does anyone use this? Here's where I read about it (link below) it's a page about Digifant "tune ups" mostly specific to the I4 engines but I'd guess the electrical connection engineering would be very similar on a Vanagon. http://members.tripod.com/~fuelie/tuneup.htm Allan -- 1991 Vanagon GL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.