Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (September 2008, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 13 Sep 2008 22:13:14 -0400
Reply-To:     Cullen Stewart <cullberly@VERMONTEL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Cullen Stewart <cullberly@VERMONTEL.NET>
Subject:      Re: Front spindle possibly needed
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

Sorry, It is a 1985 westy with power steering. ----- Original Message ----- From: "Evan Mac Donald" <vanagon_dad@SBCGLOBAL.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, September 13, 2008 8:57 PM Subject: Re: Front spindle possibly needed

There are several differences we need to know before anyone can say if the parts are available - mostly the year, but also manual or power steering. If you have power steering, but put in a spindle from a non-PS Vanagon, The geometry will not be correct. The tie-rod attach ppoints are different distances from the vertical rotation centerline.

--- On Sat, 9/13/08, Cullen Stewart <cullberly@VERMONTEL.NET> wrote:

From: Cullen Stewart <cullberly@VERMONTEL.NET> Subject: Front spindle possibly needed To: vanagon@GERRY.VANAGON.COM Date: Saturday, September 13, 2008, 11:01 PM

I recently had bearing failure on the drivers side front spindle. The outer bearing is crispy and dry. The inner bearing is fine. I assume it had grease seeping out of the speedometer cable hole and it just ran dry over time. The passengers side looks clean and fully greased. The problem is that the bearing race seems to have welded itself onto the spindle. Upon removal it left slag on the spindle that does not want to come off. Also, the threads on the spindle look a little abused. Does anyone have a new spindle that I can purchase near central Vermont? Also, what is the size die I need to chase the threads on the spindle? Thanks


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.