Date:         Wed, 10 Sep 2008 18:19:15 -0700
Reply-To:     Jeff <vw.doka@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeff <vw.doka@GMAIL.COM>
Subject:      Re: Push covers/enging tins
In-Reply-To:  <20080911005733.66A251165C3@hamburg.alientech.net>
Content-Type: text/plain; charset="us-ascii"

I couldn't help myself, so I Googled "push rod cover".  Most of the
responses were for Harleys, model plane engines, or the covers that go on
the side of the block on V8 engines (one listing for an MG).

I only went a few pages in (got bored), but that's all I found.

Cheers,

Jeff


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Mike S
Sent: Wednesday, September 10, 2008 5:42 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Push covers/enging tins

At 07:28 PM 9/10/2008, Mike Collum wrote...
>I don't mean to flog a dead horse, but I have owned and worked on VWs
>since 1962 and I have never before heard someone call valve covers or
>rocker covers "Push rod" covers nor push rod tubes ... which should, I
>would think, be self explanatory.

I'm amazed you've never heard of VW push rod tubes. That's extremely
common terminology. Google it if you want. I've never called valve
covers, "tubes," nor said that anyone did, if that's what you're
implying.

I've worked on much more than VWs, so I'm familiar with the more
universal usage of "push rod cover." Given the makeup of this list,
there's no reason to assume that someone asking an apparently simple
question is using VW specific terminology.

On an air-cooled, I would have called the item in question "the lower
engine tin," which is what I've most often heard it called (sometimes
"heater box tin").