Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2008, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 13 Sep 2008 17:31:14 -0400
Reply-To:     Hector Zapata <hlzapata@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Hector Zapata <hlzapata@GMAIL.COM>
Subject:      Re: Where do I stick this?
In-Reply-To:  <3f9f887a0809131407g39c72472p75e473085038136b@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Looked again and I can see it's a 1.9, duh. ETKA lists a aux. valve regulator 022 906 045A, connected to an adapter to the air intake elbow. Makes sense?

Héctor 1990 Carat 'Ursula'

On Sat, Sep 13, 2008 at 5:07 PM, Hector Zapata <hlzapata@gmail.com> wrote:

> Do you have an idea what the part number is? Is this engine a 1.9 or 2.1? > Perhaps using ETKA the hose might be tracked. > > Héctor > 1990 Carat 'Ursula' > > By three methods we may learn wisdom: > First, by reflection, which is noblest; > Second, by imitation, which is easiest; > and third by experience, which is the bitterest. > Confucius > > > > On Sat, Sep 13, 2008 at 2:01 PM, Chris S <szpejankowski@gmail.com> wrote: > >> I'm soooo close to putting my DJ-code Hersheymobile on the road, but I do >> have this burning question. Where do I stick this? >> >> >> http://i16.photobucket.com/albums/b7/misterpolak/WBX_transplant/Example_Pics/Emissions1.jpg >> >> Background: In the early 80s VW utilized a secondary emissions ECU, >> usually >> made by a company named "HJS". This HJS ECU had its own wiring harness, >> its >> own sensors to include the famous Lambda, or oxygen sensor. This HJS ECU >> talked to the main engine ECU. My engine is a European DJ-code 112hp >> derivative of the WBX and it is equipped with this HJS ECU. >> >> The enigma, or "enema" in the above picture is that there's a "Kanuter >> Valve", a valve of unknown function to me, that is plugged into a T from >> the >> vacuum line just below the idle control valve. This Kanuter Valve is >> plugged >> into the HJS ECU. I have no idea where the enema might go as all the >> vacuum >> ports are taken. >> >> Here are other pictures: >> >> >> http://i16.photobucket.com/albums/b7/misterpolak/WBX_transplant/Example_Pics/Emissions2.jpg >> >> http://i16.photobucket.com/albums/b7/misterpolak/WBX_transplant/Example_Pics/Emssions3.jpg >> >> My thinking is that if you're still reading this you might have an idea of >> how the old VW emissions was configured. Scott aka Mr. Shazam Turbovanz? >> :-) HELP! >> >> -- >> Chris S. >> Disclaimer: "Death and serious injury may occur" >> > > > > -- > >

--


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.