Date:         Fri, 26 Sep 2008 14:25:07 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: Question about testing O2 sensor with digital meter
Comments: To: Jim Felder <jim.felder@gmail.com>
In-Reply-To:  <4d1b79350809261054j25dfb5d5t3c329266435367c6@mail.gmail.co m>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 01:54 PM 9/26/2008, Jim Felder wrote:
>David,
>
>I get nothing coming from the ECU lead with the sensor disconnected.

You should be getting a half volt, so sounds like bad connection at
ECU or bad ECU.

Starting from key off cold with sensor connected, should see
half-volt until sensor heats up, then near zero for lean, near a volt for rich.


--
David Beierl - Providence RI USA -- http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage," '85 GL "Poor Relation"

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.