"Roger Whittaker" <rogerwhitt1@gmail.com> said: > now that these vans are 20+ years old -- > i dont think changing them out if still OEM is going to cause you any > grief > indeed ... > unless you do a worse job of installing than factory did ... With all those lines snaking all over the top of the engine -- scary! I really was tempted to plumb in metal tubing around the perimeter of the engine bay and run short rubber lines down to the injectors -- however I've sort of learned not to try to be smarter than the engineers who do this for a living... Also I guess any such solution would ideally need to be mounted on stand-offs from the motor so it would not move relative to the motor during acceleration. Allan -- 1991 Vanagon GL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.