Disregard, I realized that with a voltmeter I could determine which wire was "hot"; the other two must then be switched. I jumpered accordingly and verified that both fan speeds work. Note to anyone who might want to do this -- the circuit is "hot" even with the key off. Allan -- 1991 Vanagon GL
Allan Streib <streib@cs.indiana.edu> writes: > I exposed the thermo switch on the radiator, and removed the > connector. There is a Red/White, Red/Black, and Red/Blue wire on the > connector. What should I jumper to what to test the fan? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.