Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2008, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 6 Oct 2008 19:15:22 -0500
Reply-To:     Michael Sullivan <sandwichhead@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael Sullivan <sandwichhead@GMAIL.COM>
Subject:      Was:Replacement Intake Runner needed-Now see pics
Content-Type: text/plain; charset=ISO-8859-1


Opinions on reusability of this hole for fuel injector mount. A couple of
list members can send me one, but time off the road while shipping. Finally
drilled most of it out and can almost get the 6mm bolt in there.  Will await
replies BEFORE messing with it anymore. Thanks in advance.
http://picasaweb.google.com/sandwichhead/20081006FuelRunner?authkey=Tv_uXvIkfsk
#


---------- Forwarded message ----------
From: Michael Sullivan <sandwichhead@gmail.com>
Date: Mon, Oct 6, 2008 at 2:04 PM
Subject: Re: Replacement Intake Runner needed 2.1 Digifant
To: Scott Daniel - Turbovans <scottdaniel@turbovans.com>




 Hey, Scott.  Checked out your website last night BTW.
Yeah I pulled it off a few minutes ago and I can't believe how easy it was.
I barely needed a rachet. Took it around the corner and they shop said might
be cheaper to just buy another. What do you think it will run w/o shipping?
Thx. Pmail me.


  On Mon, Oct 6, 2008 at 1:38 PM, Scott Daniel - Turbovans <
scottdaniel@turbovans.com> wrote:


> I have one of course Michael.
> pmail me if you don't find any others.
> it's early in the day, I could get it one out today.
> I might want you old one back , mailed as slowly and inexpensively as
> possible.
> Scott
> www.turbovans.com
> ----- Original Message ----- From: "Michael Sullivan" <
> sandwichhead@GMAIL.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Monday, October 06, 2008 6:18 AM
> Subject: Replacement Intake Runner needed 2.1 Digifant
>
>
>
> Hello, all.  Since I spent the better part of the weekend trying to drill
>> out my snapped bolt in the left intake runner, I thought a list member may
>> have a spare to sell and ship to 78230 QUICKLY.  Please LMK.
>>
>> --
>> Michael in San Antonio
>> 91GL AT 'Gringo'
>>
>
>




--
Michael in San Antonio
91GL AT 'Gringo'






--
Michael in San Antonio
91GL AT 'Gringo'
Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.