In a message dated 13/10/2008 6:06:04 P.M. Central Standard Time, LISTSERV@GERRY.VANAGON.COM writes: The COFAPS pistons are indeed 1mm higher. I've measured them many times. Just put an OEM piston and a COFAP piston on the same piston pin and you will see right away the difference.
>>>>>>Also I've read about some cheap aftermarket pistons yielding lower compression due to higher wrist pin location.<<<<<<<<
Cheers, Frank Condelli Almonte, Ontario, Canada '87 Westy & Lionel Trains (_Collection for sale_ (http://members.aol.com/Fkc43/trainsal.htm) ) _Frank Condelli & Associates_ (http://members.aol.com/Fkc43/busindex.html) - Vanagon/Vanagon Westfalia Service in the Ottawa Valley _Vanagon Stainless Steel Exhaust Systems_ (http://members.aol.com/Fkc43/exhaust.htm) _BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm) a VW Camper camping event, Almonte, ON, June 12 ~ 15, 2008
************** |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.